I Need Global
Çok kültürlü ihracat tecrübemiz ve küresel lojistik ağımızla ithalat ve ihracatta güvenilir çözüm ortağınızız.
Pompalar
SKY Hot Oil Pumps
SCP - HT Hot Water Pumps
ECO SKY
SSP - V Slurry Pump
SSP - H Slurry Pump
TS EN ISO 2858 Norm Pumps
SDS/SDS - V Double Suction Pumps
ECO SNM - ECO SNM - V
ECO SNM - ECO SNM - H
ECO SNT
SCP - HT Hot Water Pumps
PUMPED LIQUIDS
Specifically designed for hot water and geothermal water applications.
DESIGN FEATURES
- Horizontal shaft, volute-casing, single-stage, end-suction, closed-impeller centrifugal pumps.
- Heavy-duty shaft that runs dry and does not contact the pumped liquid.
- Casing sealing is provided by flat gaskets positioned to prevent displacement under pressure.
- The center-foot mounted design largely eliminates coupling misalignment caused by temperature-induced expansions.
- Suction and discharge flanges comply with TS EN 1092-2 / PN 25 (flanges comply with TS EN 1092-1 / PN 25 for pumps with steel or stainless steel casing material).
TECHNICAL DATA
- Discharge Flange: DN 32 \dots DN 250 mm
- Flow Rate (Debit): Up to 1700 m^3/h
- Head: Up to 160 m
- Operating Temperature: Up to +230 °C
- Casing Pressure: 25 bar (40 bar)
- Speed: Up to 2900 r/min
SKY Hot Oil Pumps
PUMPED LIQUIDS
Heat transfer oils and low-viscosity industrial oils that do not contain abrasive particles.
DESIGN FEATURES
- Horizontal shaft, volute-casing, single-stage, end-suction, air-cooled, closed-impeller centrifugal pumps.
- Suction and discharge flanges comply with TS EN 1092-2 / PN 16 (flanges comply with TS EN 1092-1 / PN 16 for pumps with stainless steel casing material).
- The back pull-out design allows the bearing assembly, stuffing box, pump shaft, and impeller to be dismantled without disconnecting the volute casing from the pipework. (Optionally, with a spacer coupling application, the pump’s rotor assembly can be removed without separating the electric motor from the motor support).
- All impellers are dynamically or statically balanced according to ISO 1940 class 6.3.
TECHNICAL DATA
- Cooling: Air
- Discharge Flange:
- DN 32 \dots DN 125 mm
- Flow Rate (Debit): Up to 350 m^3/h
- Head: Up to 105 m
- Operating Temperature: Up to +320 °C
- Casing Pressure: 10 bar (16 bar)
- Speed: Up to 2900 r/min
ECO SKY
PUMPED LIQUIDS
Heat transfer oils and low-viscosity industrial oils that do not contain abrasive particles.
DESIGN FEATURES
- Suction and discharge flanges comply with TS EN 1092-2 / PN 16 (flanges comply with TS EN 1092-1 / PN 16 for pumps with stainless steel casing material).
- The back pull-out design allows the bearing assembly, pump shaft, and impeller to be dismantled without disconnecting the volute casing from the pipework (optionally, with a spacer coupling application, the pump’s rotor assembly can be removed without separating the electric motor from the motor support).
SSP - V Slurry Pump
SSP - H Slurry Pump
FLUIDS TO BE TRANSFERRED
Dirty or very dirty, viscous, corrosive, and abrasive fluids containing solid particles, slurry, fibers, or pulp.
TECHNICAL DATA
- Discharge Flange: DN 50 \dots DN 350 mm
- Steam Washing Temperature: Up to 300 °C
- Flow Rate (Debit): Up to 3500 m^3/h
- Head: Up to 100 m
- Operating Temperature: From -10 °C to +110 °C
SDS/SDS - V Double Suction Pumps
PUMPED LIQUIDS
Clean or very slightly dirty, low-viscosity liquids that do not contain solid particles or fibers.
DESIGN FEATURES
- Can be manufactured with horizontal or vertical shafts as an option. Single-stage double suction pumps with axially split casing.
- Suction and discharge flanges are on the lower casing and on the same axis. The pumps can be split in half on the horizontal plane. Due to these features, it is not necessary to disconnect the pump from the pipework when the rotor assembly needs to be dismantled for maintenance or repair.
TECHNICAL DATA
- Discharge Flange: DN 65 \dots DN 600 mm
- Flow Rate (Debit): Up to 6000 m^3/h
- Head: Up to 180 m
- Operating Temperature: From -10 °C to +110 °C
- Casing Pressure: 16 bar – 25 bar
- Speed: Up to 2900 r/min
ECO SNM - ECO SNM - V
PUMPED LIQUIDS
Clean or very slightly dirty, low-viscosity liquids that do not contain solid particles or fibers.
DESIGN FEATURES
- Design according to EU 547/2012 energy regulation.
- Suction and discharge flanges comply with TS EN 1092-2 / PN 16. Flanges comply with TS EN 1092-1 / PN 16 for pumps with steel or stainless steel casing material. Production with ANSI/ASME flanges is also possible upon request.
- The main dimensions of the casing comply with TS EN 733 standards.
- Horizontal or vertical shaft, volute-casing, single-stage, end-suction, closed-impeller monoblock centrifugal pumps.
ECO SNM - ECO SNM - H
ECO SNT
PUMPED LIQUIDS
Clean or very slightly dirty, low-viscosity liquids that do not contain solid particles or fibers.
DESIGN FEATURES
- Designed according to EU 547/2012 energy regulation.
- 24 models complying with TS EN 733 standards, plus 8 complementary models are available. The main dimensions of complementary models may differ from those of other manufacturers.
- ECO SNT 40-315, 50-315, 65-315, 80-315, 100-315, 125-250 pumps can only be operated at 2900 r/min in fire applications.
TECHNICAL DATA
- Discharge Flange: DN 32 \dots DN 150 mm
- Flow Rate (Debit): Up to 600 m^3/h
- Head: Up to 100 m
- Operating Temperature (°C): From -10 °C to +140 °C
- Casing Pressure (pmax): 10 bar (16 bar)
TS EN ISO 2858 Norm Pumps
PUMPED LIQUIDS
Clean or slightly dirty, low or medium viscosity liquids that do not contain solid particles or fibers.
DESIGN FEATURES
- Horizontal shaft, volute-casing, single-stage, end-suction, closed or semi-open impeller centrifugal pumps.
- 28 models with main dimensions complying with TS EN ISO 2858 Standards, plus 10 complementary models. The main dimensions of complementary models may differ from those of other manufacturers.
- Heavy-duty shaft that runs dry and does not contact the pumped liquid.
- Casing sealing is provided by flat gaskets positioned to prevent displacement under pressure.